Best PSUs for Gaming PCs – GameRant

As PC components become more time-hungry for more power due to increased time and increased capabilities, they also require adequate cooling and a reliable, reliable power supply. Since the Power Supply Unit (PSU) is the most important part of a gaming PC since it can be both a reliable and a reliable part and can be protected from damage in many ways, you should always aim for a quality USU unit. which must meet or exceed their unspoken and unspoken needs.

Since Intel is pushing the ATX 3.0 standard in play by 2022, more recently released PSUs and upcoming models tend to be ATX 3.0 compliant. This is even more important thanks to the recent release of the Nvidia RTX 4000 series of GPUs that feature a 16-pin 12VHPWR connection that is also part of the benchmarks; It can connect up to 600W of power through a single 16-pin.

While ATX 3.0 is a new and safer standard with stricter standards in terms of what a PC can expect a PSU to do, the new connectors themselves, or rather their implementation, initially colored a lot and shout over them causing permanent damage. RTX 4090 cards are not suitable for some cases. This has led users to skip the Nvidia-supplied connector with these GPUs altogether, choosing a quality third-party 3 cable kit or simply getting a PSU with native support for a 16-pin connector.

Since the said connector is going to be almost a lot of what the GPUs will be powered by, with the PSU getting either a native 16-pin connector or a first-party adapter is going to be a test approach that could make the line down through the acquisition. That’s an easy PSU for your new graphics card needs.

Note: All options listed below either have native support for PCI-E Gen 5 cables or come with the necessary adapters to render compliance for RTX 4080/4090 GPUs out of the box. We also prefer ATX 3.0 PSUs wherever possible as part of our customer guide.

The MSI MPG A1000G PCIE5 Power Supply ticks all the right boxes and then some when it comes to delivering the goods for a current and next generation gaming PC build. The 1000W PSU is ATX 3.0 compliant and comes with a native 16-pin 12VHPWR connector capable of delivering the full spec 600W that the connector is capable of driving, making it the best PSU to buy for your RTX4070TI/4080/4090 GPU.

The MSI MPG A1000G uses excellent internals, but arguably gets into a bit of a rut when it comes to higher power loads, a common theme for most of our ATX 3.0-compliant PSUs; This results in an audible sound from the PC if on a quieter setting. But the reverse is true if you run under low load thanks to MSI’s Zero-fan in sub-50 percent MPG mode with PSU load delivering excellent power without any discernible noise.

ROG Thor 1000W Platinum II EVA Edition PSU

Best Performance PSU

Evangelion looks like Meet Thor Reliability

$340.68 $37.99 Save $39.31

The ROG Thor 1000W Platinum II EVA Edition PSU is one of the quietest and most efficient PSUs available on the market. By pairing it with the Evangelion, it comes in a sleek package that houses arguably one of the best-looking PSUs on the market at the moment, somewhat compensating for its relatively high asking price.

Brand

ASUS ROG

output

1000W

Modular Cabling

forks

80 Plus Efficiency Rating

80 Plus Platinum

Kind of connection

4+4 pin x 2, 6+2 pin x 8

Protection Features

OPP/OVP/UVP/SCP/OCP/OTP

Pros

• Excellent and reliable power delivery with great efficiency to boot makes the Thor 1000W an excellent PSU to get.
• The Thor’s Lambda A ++ noise rating means that this operates quite silently with a built-in 0GB fan mode
• It has a wide range of cables that can be used because of its modular design
• Excellent packaging and looks make it one of the most premium looking PSUs on the market

Cons

• The price is quite expensive for a 1000W PSU and cheaper options are available from competitors.
• To get the most out of this PSU you should be able to justify the aesthetic investment in it in all its glory.

The ROG Thor 1000W Platinum II EVA Edition is a marriage of the excellent Asi Thor 1000W Platinum II PSU with an Evangelion theme and the result is a sight to behold. The Thor 1000W P2 is one of the quietest PSUs we’ve tested, and like the Platinum-series 80-plus PSU, it scores high on the efficiency charts, while keeping things completely quiet at all but the highest loads.

With its Gospel-themed design and OLED display coupled with RGB lighting and some of the most premium premium bundles with a raw sleeve, The ROG Thor is a premium PSU that happens to look and feel the part. Just make sure your case shows PSU in all its glory if you continue this way. While Thor is more expensive, it brings better efficiency to the table in addition to better aesthetics in a single box packaging envelope. If you need a bit more power or simply need a standard look, consider looking at the 1200W ROG Thor Platinum PSU instead which is similarly priced.

GIGABYTE GP-UD1000GM PG5 Rev2.0 1000W PSU

Best Kindergarten PSU

Up to ATX 3.0 Compliance

GIGABYTE GP-UD1000GM PG5 Rev2.0 1000W is the 2nd revision of the successful PG5 PSU, adding a native 16-pin PCI-E 5.0 power connector and compliance with Intel’s new ATX 3.0 PSU standards in a fully supported modular design. As for the 10-year warranty, the price is affordable

Brand

gigabytes

output

1000W

Modular Cabling

forks

80 Plus Efficiency Rating

80 Plus Gold

Kind of connection

16 Pin x 1, 6+2 Pin x 4, 4+4 Pin x 2

Protection Features

OVP/OPP/SCP/UVP/OCP/OTP

Pros

• The most precious money; Clocks under $200 at MSRP for a 1000W USU that can support it
• Comes with a native 12+4 (16 pin) connector for use with next generation RTX 4000 Series GPUs
• Compliant with Intel’s ATX 3.0 motherboard

Cons

• Somewhat noisy operation when under load compared to competition

The GIGABYTE GP-UD1000GM PG5 1000W PSU is an excellent PSU that complies with ATX 3.0 and has a native 16-pin connector that allows it to power all the latest and greatest RTX 4000 series GPUs very easily. Priced under $200 for a premium PC concept, the UD series PSU from Gigabyte checks all the right boxes and a few wrong ones too.

While the GIGABYTE GP-UD1000GM PG5 passes ATX 3.0 specs, it doesn’t really go a mile beyond that. Teardowns tend to show that, despite the extensive 10-year warranty, the elements inside the PSU are somewhat missing and result in higher temperatures and noisy operation, making this budget PSU a tradeoff that works well for most users, but might want to consider power users. a completely different option.

Thermaltake Toughpower GF3 1650W PSU

The best high end PSU

Multi-GPU power Goes Gen 5

The Thermaltake Toughpower GF3 1650W PSU is an excellent PSU that features at a competitive price point for its feature set and sports 2 x 16-pin PCI-E power connectors on board, while delivering acceptable power at ambient temperatures; It can get a bit noisy, however, as Thermaltake achieves what it claims are low temperatures by using a fan curve for its 140 mm fan.

Brand

thermaltake

output

1650W

Modular Cabling

forks

80 Plus Efficiency Rating

80 Plus Gold

Kind of connection

16 Pin x 2, 6+2 Pin x 9, 4+4 Pin x 1, 8 Pin x 1

Protection Features

OCP/OVP/UVP/OPP/SCP/OTP

Pros

• One of the only PSUs on the market that offers dual 16 Pin PCI-E Power Cables
• Covered by a 10-year comprehensive warranty
• Meets Intel’s ATX 3.0 Power supply requirements easily
• It uses a large 140mm fan to keep temperatures under control

cons

• Noise at high power draw levels through the curved fan is somewhat aggressive
• Ignoring OTP protection (if present)

As one of the few PSUs on the market that offers dual 16-pin PCI-E Gen 5 power connectors, the Thermaltake Toughpower GF3 1650W PSU has its work cut out for itself as it aims to deliver a whopping 1200W across 2 connectors. . However, despite its efficient design and the quality of the parts it uses, it clicks fast. The good news is that it is difficult for the common man to cut this PSU in current hardware, but if you find a way, it will certainly be a riot.

Backed by a solid 10-year warranty, however, the Toughpower GF3 has a lot to offer if you’re into content creation or somehow have a reasonable reason to want 2 RTX 4080 or 4090 GPUs on the same system. It complies with ATX 3.0 and is available at a reasonable price. This is no mean feat by any means and credit must be given to Thermaltake where it is due.

If you’ve already turned your account on a USU purchase, you might want to consider PC Case while you’re at it. Our team has the best guide to help you make the best investment in your new gaming PC or long-term upgrade.

FAQ

Q: What resource capacity do I need to run RTX(IV)80?

The RTX 4080 Founders Edition requires at least a 750W PSU. We recommend getting at least an 850W PSU if the 1000W unit doesn’t allow for future line testing/upgrading. But if you want to be as specific as possible around the limit, you should have a high quality 750W PSU covered for the RTX 4080.

Q: What Power Supply should I get for an RTX 4090?

Nvidia’s official specification for the RTX 4090 GPU is that a minimum of 850W is required. Some AIB partners who offer overclocked versions of the same recommend a 1000W PSU. It would be a smart move to go for a 1000W PSU just to cover all the bases and allow some leeway in terms of power draw if needed.